2024 Farm King Stump Grinder 2628
- Year 2024
- Make Farm King
- Model Stump Grinder
2024 Farm King Stump Grinder 2628
2024 Farm King Stump Grinder 2628
THE ALLIED BY FARM KING STUMP GRINDER CAN CUT THROUGH EVEN THE HARDEST STUMPS.
The impressive 45 degree swing arc allows the stump grinder to cover greater surface areas of larger trees. The grinder is easily controlled using the tractor levers. The 3-point hitch grinder models utilize a slip clutch.
Features may include:- Cutting wheel design provides a smoother cutting action and higher productivity
- Durable carbide-tipped cutting teeth are economical and easy to replace
- Stabilizer bar provides solid footing during operation
- Maneuverable - goes anywhere a tractor can; gets into tight places
- Easy to operate
- Hardened bushings and grease zerks used at major pivot points for increased reliability and extended service life
- Standard pressure relief valve for precise control of cutting feed rate
- Rubber deflector helps control chips and debris during grinding
- Parking stand for easy storage
Engine
Engine Power
Gearbox rating: 60 hp | Max. power / flow: 50 PTO hp
Minimum Engine Power
power / flow required: 22 PTO hp
PTO
PTO Power, Rated Engine Speed
@540 PTO RPM: 5,515 ft/min
Drivetrain
Drive System
protection: Slip clutch | PTO / Series 5
Gear Ratio (Primary)
1:1.5
Wheels & Tires
Wheels
Cutting thickness: 3/4"
Operational
Operating Speed
Cutting wheel speed: 810 RPM | PTO: 540 RPM
Chassis
Hitch/Type
Cat. I
Dimensions
Dimensions
Cutting wheel thickness: 3/4" | Cutting wheel diameter: 26" | Max. horizontal cut: 28" | Swing arc: 45°
Overall Length
75"
Height
Cut above ground: 18"
Depth, Maximum
Cut below ground: 10" | Max. cut per pass: 5"
Weights
Weight
660 lb
Features
Features
Number of teeth: 33
Construction Material
Cutting wheel construction: Welded 2 piece laminated steel | Cutting teeth: Carbide steel bolt in