2023 Danuser Hammer Post Driver Series Euro/Global Quick Attach 21012

Information

2023 Danuser Hammer Post Driver Series Euro/Global Quick Attach 21012

Achieve a full stroke with every cycle or utilize the short stroke feature to fine tune your depth

The Hammer DOES NOT operate with springs, hydraulic cylinder, or return line. Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load it into the machine, and drive it in the ground without leaving the skid-steer seat. Tilt option allows up to 20° left or right. The hammer weight is 300 lb. from the factory. Additional weight can be added for a total of 500 lb.

Features may include:

Grapple
  • Grapple option can be added to any model for a true one-person operation (does not include t-posts). The grapple option will allow the operator to grab the post off the ground, load into the machine, and drive it in the ground without leaving the skid-steer seat.
Tilt
  • Tilt the option allows up to 20" in each direction.
Additionsl Weight Kit
  • The hammer weight is 300 lb. from the factory. Additional weight can be added for a total of 500 lb.
Mounts
  • Skid-Steer, Tractor Front-End Loader Skid-Steer, and Euro/Global are standard mount options. Backhoe & excavator custom mounts are available by submitting the form below the Gallery section.

Photos

Highlights

  • Jarvis, Ontario
  • 2023
  • Danuser
  • Hammer Post Driver Series Euro/Global Quick Attach 21012
  • Available
  • Maximum Post Width (inches): 8.5" x 9.25"

Specifications

  • 2023
  • Danuser
  • Hammer Post Driver Series
  • Euro/Global Quick Attach 21012
  • Electric
  • Impact Force: 49,000 lb. | Impact Energy: 1,026 ft.-lb. | Tractor Requirements: 75 HP Minimum
  • Hydraulic Requirements: 1,500 - 3,000 PSI; 12 - 30 GPM
  • Tilt (left or right) (degrees): 20° | Post Dimensions: T-post to Railroad tie
  • of Stroke (inches): 40"
  • Maximum Post Width (inches): 8.5" x 9.25"
  • 64"
  • 27.5"
  • 46"
  • Hammer Weight: 300 lb. | Machine Weight: 970 lb.
  • Strokes per Minute: 35